ITUT V32 V110 Soft modem Server VoIP SIP H323 E1 T1

ITUT V32 V110 Soft modem Server VoIP SIP H323 E1 T1
Replace dial up modem rack servers to VOIP based soft modem server. This is a 100% software based V32 V110 Modem server runs on Linux CENTOS platform. No Need of modem hardware. Even works on Virtual Linux Servers. This easy to integrate modem server will allow remote devices to dial in and transfer data between your server applications and the remote modem. Modem works over voice, phone calls could be over VOIP/SIP/H323 or T1/E1. Software is easy to integrate to communicate to the remote dialing device and also to integrate to your business application.
 Applications for this software can be GSM/2G/CDMA Data call devices that utilizes V32 or V110 data modem protocol, Monitoring Servers, Weather stations, telematics stations, etc. If you are looking to upgrade your old dial up hardware to something easy and convenient manage then choose our solution. We will also customize the solution for you.
Applications areas of Communicating: Telematics Devices, Monitoring Devices, Security Devices, Mobile / Marine / Air Tracking Devices, Asset Tracking Devices, Banking Security Devices, Payment Gateways, Payment Terminals ITU-T V-series Modem Server.
Easy to install, integrate with any Application Software. Receiver data can be managed from a simple C/C++ program or even a shell script. Full duplex mode of operation. Uses Linux Core. Handles simultaneous 600 calls per server. Error Correction (v42). Compression (v42bis). Compatible with VOIP/SIP/H323/T1/E1/GSM/2G/3G/LTE Devices. Web Interface for call logs and configuration. Accepts calls from any PBX such as CISCO, AVAYA, Asterisk, FreeSwitch, etc. Echo cancellation techniques. QAM is used for each channel, with synchronous line transmission at 2400 baud. Data signaling rates: 14400, 12000, 9600, 7200, and 4800 bps synchronous. Trellis coding at rates from 7200 to 14000bps for V.32bis.For V.32, two alternative modulation techniques are used for a signaling rate of 9600bps, one uses 16 carrier states and one uses trellis coding with 32 carrier states. The frequency carrier operates at 1800Hz.
The product is developed by Gradient Technologies, LLC, a company focusing on Telecom and Telephony software products and services. Additonal Product Information can be found at http://v32-v110-voip-softmodem-server.com/ or http://www.gradientsoft.com
If you are looking for an eCall In-Band Modem Server, please visit www.ecallserver.com